Interbond 201 Low Temperature

​

 

Product Description

 

A hard wearing, surface tolerant, two pack epoxy primer/finish offering corrosion protection in one coat. A temperate version of Interbond 201 is also available for use above 5°C

 

 

Intended Uses

​

As an anticorrosive primer/finish for decks, deck fittings and cargo holds.

 

For use at Maintenance & Repair or On Board Maintenance.

​

​

Product Information

​

Colours: Surf Grey, Storm Grey, Red, and Signal Green

Finish/Sheen: Semi-gloss

Sizes: 

​

Part B (Curing Agent): KDA200 (low temperature)

Volume Solids: 74% ±2% (ISO 3233:1998)

Mix Ratio: 4.00 volume(s) Part A to 1 volume(s) Part B
Typical Film Thickness: 150 microns dry (203 microns wet)
Theoretical Coverage: 4.93 m²/litre at 150 microns dft, allow appropriate loss factors
Method of Application: Airless Spray, Brush, Roller
Flash Point (Typical): Part A 28°C; Part B 38°C; Mixed 32°C (Product produced and supplied in North America has flash points of Part A 43°C , Part B 39°C and Mixed 39°C respectively due to locally sourced solvents. There is no detrimental effect on product performance.)

​

​

Thinner

 

Thinning is not recommeded for Interbond 201 Low Temperature.

Use International GTA220 only in exceptional circumstances. 

​

​

Technical Data Sheet

​

​

​

​

​