top of page

Intergard 5000



Product Description

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.

Intended Uses

As a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted, hydroblasted or mechanically cleaned surfaces.

For use at Newbuilding, Maintenance & Repair or On Board Maintenance.



Product Information

Colour: Aluminium

Finish/Sheen Semi-gloss

Sizes: 5L

Part B (Curing Agent): KBA505

Volume Solids: 82% ±2% (ISO 3233:1998)

Mix Ratio: 4 volume(s) Part A to 1 volume(s) Part B

Typical Film Thickness: 150 microns dry (183 microns Wet) Range 125 - 350 microns dry (152 - 427 microns wet) may be specified depending upon end use

Theoretical Coverage: 5.47 m²/litre at 150 microns dft, allow appropriate loss factors

Method of Application: Airless Spray, Brush, Roller

Flash Point (Typical): Part A 32°C; Part B 58°C: Mixed 33°C

Induction Period: Not required




Thinners are not recommended for Intergard 5000.

If required use International GTA220 only in exceptional circumstances.



Technical Data Sheet

bottom of page