Intergard 7020

​

 

Product Description

 

A two pack, abrasion resistant aluminium pure epoxy with good anticorrosive performance.

 

 

Intended Uses

​

As an abrasion resistant pure epoxy to limit mechanical damage and subsequent corrosion in cargo holds.

 

For use at Newbuilding and Maintenance & Repair.

​

​

Product Information

​

Colours: Aluminium, Red and Aluminium Grey
Finish/Sheen: Semi-gloss

Sizes: 

​

Part B (Curing Agent): EHA704

Volume Solids: 74% ±2% (ISO 3233:1998)

Mix Ratio: 3 volume(s) Part A to 1 volume(s) Part B
Typical Film Thickness: 125 microns dry (169 microns wet)
Theoretical Coverage: 5.92 m²/litre at 125 microns dft, allow appropriate loss factors
Method of Application: Airless Spray, Brush, Roller
Flash Point (Typical): Part A 36°C; Part B 32°C; Mixed 34°C
Induction Period: Not required

 

 

Thinner

 

Thinning is not normally required for Intergard 7020.

If required use International GTA220.

​

​

Technical Data Sheet

​

​

​

​

​

​

​

​

​

​

​