top of page

Intergard 740

Product Description

A two pack epoxy finish.

Intended Uses

As a cosmetic finish coat for use on areas above the waterline.

 

For use at Newbuilding, Maintenance & Repair or On Board Maintenance.

Product Information

Colour: White, Storm Grey, Red, Signal Green, Black and a wide range of colours

Finish/Sheen: High Gloss

Sizes: 5L

Part B (Curing Agent): ECA914

Volume Solids: 51% ±3% (ISO 3233:1998)

Mix Ratio: 4.00 volume(s) Part A to 1 volume(s) Part B

Typical Film Thickness: 50 microns dry (98 microns wet)

Theoretical Coverage:10.2 m²/litre at 50 microns dft and 51% volume solids, allow appropriate loss factors

Method of Application: Airless Spray, Roller, Brush, Conventional Spray

Flash Point (Typical): Part A 27°C; Part B 29°C; Mixed 28°C

Induction Period: 30 minutes at temperatures below 25°C

Thinner

Thinning is not normally required for Intergard 740.

Of required use International GTA220.

Technical Data Sheet

bottom of page