top of page

Interlac 665

Product Description

A one pack alkyd gloss finish.

Intended Uses

For use as an easily maintained cosmetic finish coat on areas above the waterline.

 

For use at Newbuilding, Maintenance & Repair or On Board Maintenance.

Product Information

Colour: White, Orange, Storm Grey, Red, Signal Green, Black and a wide range of colours.

Finish/Sheen: High Gloss

Sizes: 5L

Part B (Curing Agent): Not applicable

Volume Solids: 48% ±3% (ISO 3233:1998)

Typical Film Thickness: 40 microns dry (83 microns wet)

Theoretical Coverage: 12 m²/litre at 40 microns dft, allow appropriate loss factors

Method of Application: Airless Spray, Brush, Conventional Spray, Roller

Flash Point (Typical) Single Pack 40°C (Product produced and supplied in North America has a flashpoint of 41°C due to locally sourced solvents. There is no detrimental effect on product performance.)

Thinner

Thinning is not normally required for Interlac 665.

If required use International GTA004.

Technical Data Sheet

bottom of page