top of page

Interprime 198


Product Description

A quick drying, one pack primer. Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes.

Intended Uses

For the maintenance of above water areas. Approved for the carriage of grain when used as part of an approved scheme.


For use at Maintenance & Repair or On Board Maintenance.

Product Information

Colour: White, Grey and Red

Finish/Sheen: Matt

Sizes: 5L

Part B (Curing Agent): Not applicable

Volume Solids: 41% ±2% (ISO 3233:1998)

Mix Ratio: Not applicable

Typical Film Thickness: 75 microns dry (183 microns wet)

Theoretical Coverage: 5.47 m²/litre at 75 microns dft, allow appropriate loss factors

Method of Application: Airless Spray, Brush, Roller

Flash Point (Typical) Single Pack 35°C


Thinners are not recommended for Interprime 198.

Use International GTA007 only in exceptional circumstances.

Technical Data Sheet

bottom of page