top of page

Intersheen 579

Product Description

A fast drying, one pack, modified acrylic finish.

 

 

Intended Uses

 

As a cosmetic finish on above water areas.

 

For use at Newbuilding, Maintenance & Repair or On Board Maintenance.

Product Information

 

Colour: White, Storm Grey, Red, Signal Green, Black  and a wide range of colours.

Finish/Sheen: Semi-gloss

Sizes: 5L and 20L

Part B (Curing Agent): Not applicable

Volume Solids: 35% ±3% (ISO 3233:1998)

Mix Ratio: Not applicable

Typical Film Thickness: 40 microns dry (118 microns wet)

Theoretical Coverage: 8.75 m²/litre at 40 microns dft, allow appropriate loss factors

Method of Application: Airless Spray, Brush, Roller

Flash Point (Typical): Single Pack 23°C (Product produced and supplied in North America has a flash point of 26°C, in Korea has a flash point of 22°C due to locally sourced solvent. There is no detrimental effect on product performance)

 

 

Thinner

 

Thinners are not recommended to use with Intersheen 579.

If required use International GTA007 only in exceptional circumstances.

Technical Data Sheet

bottom of page