top of page

Intershield One-2-One - Aluminium

Product Description

 

A surface tolerant universal pure epoxy primer for use as an anticorrosive touch up coating providing excellent corrosion protection and low temperature capability. Designed as a crew friendly onboard maintenance two pack universal primer (<340 g/l) specifically engineered to equal mix ratio offering simplified mixing and reduced wastage.

 

Intended Uses

As an On Board Maintenance universal anticorrosive primer. Suitable for use with controlled cathodic protection.

Product Information

Colour: Aluminium 

Finish/Sheen: Matt

Sizes: 10L

Part B (Curing Agent): IIA125

Volume Solids: 65% ±2% (ISO 3233:1998)

Mix Ratio: 1 volume(s) Part A to 1 volume(s) Part B

Typical Film Thickness: 75 microns dry (115 microns wet)

Theoretical Coverage: 8.67 m²/litre at 75 microns dft, allow appropriate loss factors

Method of Application: Airless Spray, Brush, Roller

Flash Point (Typical): Part A 39°C; Part B 27°C; Mixed 31°C

Induction Period: Not applicable

Thinner

Thinning is not normally required for Intershield One-2-One - Aluminium

Technical Data Sheet

bottom of page