top of page

Intertuf 203

Product Description

A one pack, tar free vinyl anticorrosive which can be used at temperatures down to -5°C.

Intended Uses

As an anticorrosive for both above and below the waterline and also as a sealer coat over Tributyltin (TBT) antifoulings.

 

Suitable for use with controlled cathodic protection.

 

For use at Newbuilding, Maintenance & Repair or On Board Maintenance.

Product Information

Colours: Aluminium and Black

Finish/Sheen: Not applicable

Sizes: 20L

Part B (Curing Agent): Not applicable

Volume Solids: 40% ±2% (ISO 3233:1998)

Mix Ratio: Not applicable

Typical Film Thickness: 75 microns dry (188 microns wet)

Theoretical Coverage: 5.33 m²/litre at 75 microns dft, allow appropriate loss factors

Method of Application: Airless Spray, Brush, Roller

Flash Point (Typical): Single Pack 26°C (Product produced and supplied in Korea has a flash point of 21°C due to locally sourced solvent. There is no detrimental effect on product performance)

Induction Period: Not applicable

Thinner

Thinners are not recommended for Intertuf 203.

Use International GTA007 only in exceptional circumstances.

 

 

Technical Data Sheet

bottom of page